Research
The list below contains papers, journal articles, videos, web content, etc. that address one or more areas of metrology. This is not an exhaustive list. If there is research that you feel belongs in this list, please email info@emetrology.com.
Featured Research
-
Advances in large-scale metrology–review and future trends – R.H. Schmitt et al.
Abstract The field of Large-Scale Metrology has been studied extensively for many decades and represents the combination and competition of topics as diverse as…
-
Calibration of industrial CT using two Forest-Balls – Y Shi et al.
X Ray CT/7 Abstract A small forest-ball was manufactured and calibrated using CMM F25. An industrial CT called Metrotom1500 was calibrated by the small…
-
Choosing test positions for laser tracker evaluation and future standards development – B. Muralikrishnan, D Sawyer, C. Blackburn, S.Phillips, C. Shakarji, and E.Morse .
Laser Tracker/4 Abstract A working group within the ISO TC 213 committee is developing a draft document [1] for evaluating the performance of laser…
-
Error mapping of CMMs and machine tools by a single tracking interferometer – H. Schwenke, M. Franke, and J. Hannaford.
Abstract This paper presents a novel approach for the mapping of geometric errors of machine tools and coordinate measuring machines by a single tracking…
-
Large-scale metrology instrument performance evaluations at NIST- WT Estler, D. Sawyer, B. Borchardt, S.D. Phillips.
Laser Tracker/3 Abstract The ASME B89 Committee on Dimensional Metrology has approved a new American National Standard B89.4.19 – Performance Evaluation of Laser Based…
No featured research found for this metrology type.
Research
-
A practical method for evaluating measurement system uncertainty – JM. Calkins, and RJ. Salerno.
Abstract This paper describes a procedure used to determine the measurement uncertainties of spherical measurement systems. This procedure requires measuring a series of unknown…
-
Accuracy of industrial computed tomography measurements: Experimental results from an international comparison – S. Carmignato
X Ray CT/4 Abstract X-ray computed tomography (CT) is increasingly used in industry for dimensional quality controlpurposes. However, due to numerous and complex error…
-
Advances in large-scale metrology–review and future trends – R.H. Schmitt et al.
Abstract The field of Large-Scale Metrology has been studied extensively for many decades and represents the combination and competition of topics as diverse as…
-
ASME B89.4.19 performance evaluation tests and geometric misalignments in laser trackers – B. Muralikrishnan, D. Sawyer, C. Blackburn, S. Phillips, B. Borchardt B, T.Estler.
Laser Tracker/2 ABstract Small and unintended offsets, tilts, and eccentricity of the mechanical and optical components in laser trackers introduce systematic errors in the…
-
Calibration of industrial CT using two Forest-Balls – Y Shi et al.
X Ray CT/7 Abstract A small forest-ball was manufactured and calibrated using CMM F25. An industrial CT called Metrotom1500 was calibrated by the small…
-
Choosing test positions for laser tracker evaluation and future standards development – B. Muralikrishnan, D Sawyer, C. Blackburn, S.Phillips, C. Shakarji, and E.Morse .
Laser Tracker/4 Abstract A working group within the ISO TC 213 committee is developing a draft document [1] for evaluating the performance of laser…
-
Creating a multi-material length measurement error test for the acceptance testing of dimensional computed tomography systems – F. B. Oliveira et al.
X Ray CT/5 Abstract Non-destructive testing (e.g. defect detection, material characterization), reverse engineering, fibre orientation, and morerecently coordinate metrology represent the broad range of…
-
Dimensional measurement traceability of 3D imaging data – S. Phillips, M. Krystek, C. Shakarji, K. Summerhays.
Abstract This paper discusses the concept of metrological traceability to the International System of Units (SI) unit of length, the meter. We describe how…
-
Error mapping of CMMs and machine tools by a single tracking interferometer – H. Schwenke, M. Franke, and J. Hannaford.
Abstract This paper presents a novel approach for the mapping of geometric errors of machine tools and coordinate measuring machines by a single tracking…
-
Large-scale metrology instrument performance evaluations at NIST- WT Estler, D. Sawyer, B. Borchardt, S.D. Phillips.
Laser Tracker/3 Abstract The ASME B89 Committee on Dimensional Metrology has approved a new American National Standard B89.4.19 – Performance Evaluation of Laser Based…
-
Laser trackers for large-scale dimensional metrology: A review – B. Muralikrishnan, S. Phillips , D. Sawyer
Laser Tracker/1 Abstract Thirty years since their invention, laser trackers are now recognized as the measurement tool of choice in the manufacture and assembly…
-
Robot performance measurements using automatic laser tracking techniques – K. Lau K, R. Hocken, L. Haynes.
Laser tracker/5 Abstract This paper describes two laser tracking techniques currently under development at the National Bureau of Standards for robot performance measurements. Tests…
No results found. Reset the filters and try a different combination.