Zeiss
ZEISS provides a range of metrology solutions, including coordinate measuring machines (CMMs), optical measurement systems, =microscopy systems, and 3D X-ray metrology for industries including automotive, aerospace, and medical.
Coordinate Metrology
-
-
Werth
Werth manufactures coordinate measuring machines (CMMs) with optics, probe, computed tomography (CT) and multi-sensor systems.
-
LK Metrology
LK Metrology designs metrology solutions including coordinate measuring machines (CMMs), portable measuring arms, and metrology software for manufacturing and quality applications.
-
ISO 15530-3: 2011 Geometrical Product Specifications (GPS) — Coordinate Measuring Machines (CMM): Technique for Determining the Uncertainty of Measurement – Part 3: Use of Calibrated Work pieces or Measurement Standards
Scope This part of ISO 15530 specifies the evaluation of measurement uncertainty for results of measurements obtained by a CMM (coordinate measuring machine) and by using calibrated workpieces or measurement standards. It provides an experimental technique for simplifying the uncertainty evaluation of CMM measurements, whose approach (substitution measurements) leads to measurements being carried out in the…
-
ISO/TS 15530-1: 2013 Geometrical Product Specifications (GPS) — Coordinate Measuring Machines (CMM): Technique for Determining the Uncertainty of Measurement – Part 1: Overview and Metrological Characteristics
Scope This part of ISO 15530 provides an overview of the ISO 15530 series. It discusses the metrological characteristics of coordinate measuring machines (CMMs), the sources of task-specific uncertainty, and the relationship between the ISO 10360 and ISO 15530 series.
-
ISO 14978: 2006 Geometrical Product Specifications (GPS) — General Concepts and Requirements for GPS Measuring Equipment
Scope This document specifies the general requirements, calibration, terms and definitions of characteristics of GPS measuring equipment, for example micrometers, callipers, gauge blocks and rotary axis form measuring instruments. This document forms the basis for standards defining and describing the design characteristics and metrological characteristics for measuring equipment and gives guidance for the development and…
-
ISO 10360-9:2013 Geometrical Product Specifications (GPS) — Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) – Part 9: CMMs with Multiple Probing Systems
Scope This part of ISO 10360 specifies procedures for testing the performance of coordinate measuring machines of various designs that use multiple probing systems in contacting and non-contacting mode. It applies to It considers CMMs of single ram designs as well as multiple ram designs with small or with large overlapping measuring volume. It applies to multiple probing…
-
ISO 10360-8:2013 Geometrical Product Specifications (GPS) — Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) – Part 8: CMMs with Optical Distance Sensors
Scope This part of ISO 10360 specifies the acceptance tests for verifying the performance of a CMM (coordinate measuring machine) when measuring lengths as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the CMM. The acceptance and reverification tests given in this part of ISO 10360 are applicable only…
-
ISO 10360-7:2011 Geometrical Product Specifications (GPS) — Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) – Part 7: CMMs Equipped with Imaging Probing Systems
Scope This part of ISO 10360 specifies the acceptance tests for verifying the performance of a coordinate measuring machine (CMM) used for measuring linear dimensions as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the CMM. The acceptance and reverification tests given in this part of ISO 10360 are…
-
ISO 10360-6:2001 Geometrical Product Specifications (GPS) — Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) – Part 6: Estimation of Errors in Computing Gaussian Associated Features
Scope This part of ISO 10360 specifies a method for testing software used for computing associated features from coordinate measurements. The features of concern are the line (in two and three dimensions), the plane, the circle (in two and three dimensions), the sphere, the cylinder, the cone and the torus. One or more separate tests are required for…
-
ISO 10360-5:2010 Geometrical Product Specifications (GPS) — Acceptance and Reverification Tests for Coordinate Measuring Machines (CMM) – Part 5: CMMs Using Single and Multiple Stylus Contacting Probing Systems
Scope This document specifies acceptance and periodic reverification tests of CMM performance with contacting probing systems and is only applicable to CMMs using: NOTE CMM probing performance tests are specified by the maximum permissible errors (MPEs), due to the impracticality of isolating the performance of the probing system from that of the CMM, even on a…
-